Products Shop / Price 2021 and Opinions / Where to buy?

Grease Cartridge 70 g

Iwona Kliś — Wed, 08 Mar 2023 09:47:28 +0000

Basic properties:

Wear resistance
Low friction resistance
Long service life
Low tendency to oxidation
Water resistance
Resistance to corrosion

Features:

Color: brown
Base oil: mineral
Consistency thickening agent: lithium soap
Working temperature (℃) -15 ~ 120
NLGI class (0.1 mm) 2
Viscosity (cst) 40 ℃ – 200
Dripping temperature (℃) 190

Artykuł Grease Cartridge 70 g pochodzi z serwisu Omni3D.

Filament bowden – OmniSTART / Omni200

Iwona Kliś — Tue, 21 Feb 2023 11:39:48 +0000

Artykuł Filament bowden – OmniSTART / Omni200 pochodzi z serwisu Omni3D.

HT Temperature sensor – Omni200 CF

Iwona Kliś — Tue, 21 Feb 2023 11:37:34 +0000

Artykuł HT Temperature sensor – Omni200 CF pochodzi z serwisu Omni3D.

HT Heater – Omni200 CF

Iwona Kliś — Tue, 21 Feb 2023 11:33:28 +0000

Artykuł HT Heater – Omni200 CF pochodzi z serwisu Omni3D.

Ejector Rod

Iwona Kliś — Tue, 21 Feb 2023 10:20:19 +0000

Compatibility: Omni200 CF, Omni200, OmniSTART

Artykuł Ejector Rod pochodzi z serwisu Omni3D.

Magnetic mat with sticker in back (PEI builtplate)

Iwona Kliś — Tue, 21 Feb 2023 10:16:36 +0000

If you want to use the PEI tray for the OmniSTART or Omni200 printer then you need to get this magnetic pad, which will allow you to properly attach the tray to the work platform.

Artykuł Magnetic mat with sticker in back (PEI builtplate) pochodzi z serwisu Omni3D.

Magnetic bulitplate PEI – Omni200/OmniSTART

Iwona Kliś — Tue, 21 Feb 2023 10:14:55 +0000

The gold tray with textured PEI is considered one of the most convenient and reliable work platform surfaces designed for 3D printers. It is flexible which allows easy and quick removal of the finished model without the need for additional tools.

When cooled down, prints peel off of it by themselves, and when it is warm, it is enough to slightly deform it to release the print from it. The tray is held on the table surface by a magnet, so it can be easily removed from the printer and cleaned. The PEI tray is more resistant than the magnetic tray and is additionally double-sided. If you scratch one side then all you have to do is flip the tray over.

The tray is compatible with materials such as PLA, PETG, TPU, ABS.

If you want to use PEI tray for OmniSTART or Omni200 printer then you need to get a magnetic pad, which will allow you to properly attach the tray to the working platform

Artykuł Magnetic bulitplate PEI – Omni200/OmniSTART pochodzi z serwisu Omni3D.

Standard Hotend

Iwona Kliś — Tue, 21 Feb 2023 10:11:17 +0000

Artykuł Standard Hotend pochodzi z serwisu Omni3D.

Nozzle Cleaning Needle 0,3mm

Iwona Kliś — Tue, 21 Feb 2023 09:41:03 +0000

0.3mm diameter.

Artykuł Nozzle Cleaning Needle 0,3mm pochodzi z serwisu Omni3D.

KIMYA PETG Carbon

Iwona Kliś — Mon, 30 Jan 2023 09:58:18 +0000

KIMYA PETG Carbon

PETG material reinforced with carbon fibers.

This combines the high temperature resistance of PETG with the strength that comes from the addition of carbon fibers. It also has very high bending resistance. Due to its stiffness, it is used for specific mechanical parts, especially in the automotive industry.

Due to the addition of carbon fiber, with abrasive properties, a nozzle made of high hardness material such as hardened steel is required for printing PETG CARBON.

Printing temperature

220-260 °C

Platform temperature

60-100 °C

Printing speed

40-70 mm/s

Artykuł KIMYA PETG Carbon pochodzi z serwisu Omni3D.